STAIN: Usually built-up and stiff

CONTAINS: Pigments, drying oils, resins, gums, volatile solvents

* Check label on paint for specific thinner or solvent OR

1. Apply dry-cleaning solvent.
2. Apply POG, blot; apply dry-cleaning solvent, blot.
3. Repeat step 2 until as much paint as possible is removed.
4. Weight down the stain with towels dampened with dry-cleaning solvent for several hours to
loosen, blot with solvent.
5. Apply several drops of detergent solution and work into the stain, blot.
6. Apply ammonia solution, blot.
7. Alternate steps 2 and 5 until stain is removed.
8. Rinse thoroughly with warm water, blot until dry.

STAIN: Absorbed or built-up, stiff when dry

CONTAINS: Water, latex, pigments, emulsifiers, preservatives

1. Apply detergent solution, blot. Repeat as needed.
2. Apply ammonia solution, blot.
3. Rinse with water, blot until dry
4. Apply POG on aged, hardened paint, blot.
5. Apply dry-cleaning solvent, blot. Repeat as needed.